Lawn Mower Operating Procedures and Maintenance Process

I. Safety of use

1. Before using the lawn mower, you should understand the instruction manual of the lawn mower, familiarize yourself with the operation essentials and understand the safety matters to ensure the safety of use.

2. When using the lawn mower, check whether the blade is intact, whether the body is firm, whether the parts are normal, to ensure that there is no abnormality and failure.

3. Before using the lawn mower, you should wear good working clothes, safety helmet and glasses, and work gloves to protect the safety of the staff.

II. Operating Methods

1. When using the lawn mower, it is advisable to adopt single-line cutting, gradually advancing forward from the end, avoiding repeated dragging of the machine body.

2. Cutting height is appropriate to one-third of the length of the lawn, too low or too high cutting height may cause damage to the lawn.

3. When using the lawn mower, avoid bumping into fixed objects as much as possible to avoid damaging the machine and causing danger at the same time.

4. During the cutting process, keep the blade as clean and dry as possible to avoid accumulation of dirt and rust.

III. The maintenance of common sense

1. Immediately after the lawn mower has finished working, the machine should be thoroughly cleaned and maintained, especially the blades and oil and other parts.

2. Before using the lawn mower, you should check whether the machine needs to add oil, if there is a lack of oil you need to add in time.

3. When the lawn mower has not been used for a long time, pay attention to the rust-proof treatment of the machine, so as not to affect the normal use of the machine due to rust.

4. For lawn mowers that have been used for a long time, regular maintenance and replacement should be carried out, and routine maintenance should be maintained during the use of the machine to ensure its performance and service life.

In short, the use of lawn mower regulations and maintenance process is a very important part of the process, we need to carefully comply with the relevant provisions and requirements in the use of the process, and to ensure that the machine routine maintenance and repair, so as to ensure the performance and service life of the lawn mower, and to better complete the lawn maintenance tasks.